Dyson Vacuum Troubleshooting Guide

Dyson has been in the business for decades now, producing some of the most popular vacuums used in households worldwide. These products perform very well, but they do face their fair share of problems from time to time.

However, with some simple Dyson vacuum troubleshooting, you can solve most of those problems pretty quickly.

Some of the most common Dyson vacuum problems include shutting off after a few minutes or not turning on at all. In addition, some problems might trigger blinking yellow or red lights on the vacuum, or you might find that the vacuum isn’t charging or isn’t producing any suction.

If you’re experiencing any of these issues with your Dyson vacuum, don’t worry. You’ve come to the right place. First, we’ll explore each issue to understand its likely cause. Then, we’ll present some possible solutions to them so you can get back to vacuuming like usual.

Here are some of the most problems you might face with your Dyson vacuum, including their possible causes and potential solutions.

Dyson Vacuum Shuts Off After A Few Minutes

Why it happens: Suppose your Dysoom vacuum runs normally but shuts off after a few seconds or minutes. If that’s the case, then it’s likely that the vacuum is doing so to prevent damage from overheating.

The vacuum does that because airflow is blocked, likely in the vacuum’s filter. Over time, the filter will naturally get clogged with dirt, dust, and other debris.

Despite emptying all the dust and dirt, the filter might still fail to allow air to pass through smoothly.

Without sufficient airflow, the Dyson vacuum can’t stay cool and will therefore shut itself off before anything bad happens.

How to fix it: Fixing this problem involves two steps. Firstly, the filter needs to be cleaned thoroughly. Washing it under a tap is good, but it’s not enough.

In addition to that, you’ll want to take it apart and ensure that you’re cleaning out any buildup deep inside the filter and its compartment. 

Once it’s been thoroughly cleaned and dried, then you need to wait at least 24 hours to let it dry before put everything back together.

Next, unplug the Dyson vacuum charging point from its power supply. After five seconds, plug it back in and place the Dyson vacuum on the charging point. Press the trigger on the vacuum for 20 seconds and let go.

Then, use the vacuum as usual. It should work normally.  

Dyson Vacuum Blinking Red Light

Why it happens: Dyson vacuums have a flashing light on both sides to let you know if there’s an issue.

These lights are color coded, and a red blinking light indicates a big problem. Besides the color, how many times that red light blinks will also indicate a different type of problem. So, 

• If the red light blinks less than 12 times, then it’s a problem with the motor.
• If the red light blinks more than 12 times, then it’s a problem with the battery pack.

To find out, pull the vacuum trigger and count how many times the red light blinks.

How to fix it: The solution for a blinking red light on a Dyson vacuum will depend on whether it’s a motor problem or a battery problem.

If it’s a motor problem, you can inspect it to see if it’s jammed by a foreign object. If it still won’t work, then it’s possible that you might need to replace the motor for your Dyson vacuum.

However, if it’s a battery problem, then it’s likely that you’ll need to purchase a new battery pack instead.

Dyson has been in the business for decades now, producing some of the most popular vacuums used in households worldwide. These products perform very well, but they do face their fair share of problems from time to time.

However, with some simple Dyson vacuum troubleshooting, you can solve most of those problems pretty quickly.

Some of the most common Dyson vacuum problems include shutting off after a few minutes or not turning on at all. In addition, some problems might trigger blinking yellow or red lights on the vacuum, or you might find that the vacuum isn’t charging or isn’t producing any suction.

If you’re experiencing any of these issues with your Dyson vacuum, don’t worry. You’ve come to the right place. First, we’ll explore each issue to understand its likely cause. Then, we’ll present some possible solutions to them so you can get back to vacuuming like usual.

Here are some of the most problems you might face with your Dyson vacuum, including their possible causes and potential solutions.

Dyson Vacuum Shuts Off After A Few Minutes

Why it happens: Suppose your Dysoom vacuum runs normally but shuts off after a few seconds or minutes. If that’s the case, then it’s likely that the vacuum is doing so to prevent damage from overheating.

The vacuum does that because airflow is blocked, likely in the vacuum’s filter. Over time, the filter will naturally get clogged with dirt, dust, and other debris.

Despite emptying all the dust and dirt, the filter might still fail to allow air to pass through smoothly.

Without sufficient airflow, the Dyson vacuum can’t stay cool and will therefore shut itself off before anything bad happens.

How to fix it: Fixing this problem involves two steps. Firstly, the filter needs to be cleaned thoroughly. Washing it under a tap is good, but it’s not enough.

In addition to that, you’ll want to take it apart and ensure that you’re cleaning out any buildup deep inside the filter and its compartment. 

Once it’s been thoroughly cleaned and dried, then you need to wait at least 24 hours to let it dry before put everything back together.

Next, unplug the Dyson vacuum charging point from its power supply. After five seconds, plug it back in and place the Dyson vacuum on the charging point. Press the trigger on the vacuum for 20 seconds and let go.

Then, use the vacuum as usual. It should work normally.  

Dyson Vacuum Blinking Red Light

Why it happens: Dyson vacuums have a flashing light on both sides to let you know if there’s an issue.

These lights are color coded, and a red blinking light indicates a big problem. Besides the color, how many times that red light blinks will also indicate a different type of problem. So, 

• If the red light blinks less than 12 times, then it’s a problem with the motor.
• If the red light blinks more than 12 times, then it’s a problem with the battery pack.

To find out, pull the vacuum trigger and count how many times the red light blinks.

How to fix it: The solution for a blinking red light on a Dyson vacuum will depend on whether it’s a motor problem or a battery problem.

If it’s a motor problem, you can inspect it to see if it’s jammed by a foreign object. If it still won’t work, then it’s possible that you might need to replace the motor for your Dyson vacuum.

However, if it’s a battery problem, then it’s likely that you’ll need to purchase a new battery pack instead.