Kenmore Washer Code LE – Troubleshooting Guide

When you’re all set to do a load of laundry, the last thing you want to see on the display screen is an error code of any kind.  Suppose, in this case, the letters LE appear.  Just seeing those code letters won’t directly tell you what’s happening (or not happening) with your washer.

The Kenmore washing machine error code “LE” occurs on front-loading washers and indicates that the washer will only run at a lower speed or not run at all because the drive motor has locked up. 

Knowing what this code means will help you determine if you can fix the problem yourself or if it’s time to call a repairman.  Check out this handy guide for more information if you’re getting the LE error on your Kenmore washer.

The Kenmore washing machine error code LE means that the washer cannot run at its normal speed.  When you press the start button, you will find that the washer acts sluggishly and barely rotates or does not move at all.

How Do You Enter Diagnostic Mode to Check for Codes?

Some washing machines can perform a self-diagnostics test when they show an error code.  Follow these steps to put your Kenmore washer into diagnostic mode:

1. Turn the dial to Drain/Spin.
2. Press Pause/Cancel to turn off the control.
3. In the next 5 seconds, press and hold Pause/Cancel at the same you press and hold Options.  The LED display will start moving rapidly.
4. To check each of the washer’s components (water valves, door lock, and motor), rotate the control dial clockwise one click.  This will be 8 clicks in all.
5. In the 9th position, you will see the last recorded error code.  
6. To exit diagnostic mode, unplug the washing machine.

Safety Tip:  The machine door can still be opened when the washer is in diagnostics test mode.  Do not open the door and reach inside because the basket will be spinning and this could cause injury.

When you’re all set to do a load of laundry, the last thing you want to see on the display screen is an error code of any kind.  Suppose, in this case, the letters LE appear.  Just seeing those code letters won’t directly tell you what’s happening (or not happening) with your washer.

The Kenmore washing machine error code “LE” occurs on front-loading washers and indicates that the washer will only run at a lower speed or not run at all because the drive motor has locked up. 

Knowing what this code means will help you determine if you can fix the problem yourself or if it’s time to call a repairman.  Check out this handy guide for more information if you’re getting the LE error on your Kenmore washer.

The Kenmore washing machine error code LE means that the washer cannot run at its normal speed.  When you press the start button, you will find that the washer acts sluggishly and barely rotates or does not move at all.

How Do You Enter Diagnostic Mode to Check for Codes?

Some washing machines can perform a self-diagnostics test when they show an error code.  Follow these steps to put your Kenmore washer into diagnostic mode:

1. Turn the dial to Drain/Spin.
2. Press Pause/Cancel to turn off the control.
3. In the next 5 seconds, press and hold Pause/Cancel at the same you press and hold Options.  The LED display will start moving rapidly.
4. To check each of the washer’s components (water valves, door lock, and motor), rotate the control dial clockwise one click.  This will be 8 clicks in all.
5. In the 9th position, you will see the last recorded error code.  
6. To exit diagnostic mode, unplug the washing machine.

Safety Tip:  The machine door can still be opened when the washer is in diagnostics test mode.  Do not open the door and reach inside because the basket will be spinning and this could cause injury.